Niagara Interface Masters 4224 10GB Load Balancer 24x port SFP/SFP+

Description

For sale is a Niagara Interface Masters 4224 10GB Load Balancer. Condition is Used. Powers on and console output below.  No visible output on LCD screen.  No password information available.  Being sold as-is, "For Parts or Not Working" with no returns.
U-Boot 1.1.1 (Development build, svnversion: u-boot:668M, exec:668) (Build time: Jun 28 2009 - 03:46:37)
IM_N2810 board revision major:0, minor:0, serial #: unknown
OCTEON CN5010-CP pass 1.1, Core clock: 400 MHz, DDR clock: 200 MHz (400 Mhz data rate)
DRAM:  512 MB
Now running in RAM - U-Boot at: 0x80080000
#0xc4 0x0
#0x0 0x0
#0xc4 0x0
#0x0 0x0
#0xc4 0x0
#0x0 0x0
#0xc4 0x0
#0x0 0x0
#0xc4 0x0
#0x0 0x0
Flash: 16 MB
Clearing DRAM....... done
BIST check passed.
Starting PCI
PCI Status: PCI 32-bit
PCI BAR 0: 0x00000000, PCI BAR 1: Memory 0x00000000  PCI 0xf8000000
Net:   octeth0
Warning: octeth0 MAC addresses don't match:
Address in SROM is         00:DE:AD:00:75:00
Address in environment is  00:0C:FFFFFFBD:00:FFFFFFD9:7C
, octeth1, octeth2                                                            0
Uncompressing 0xe00000@0xbec80000 to 0x2000000@0x9f00000
Uncompressed 0x1358a20 bytes
Unzip sucessfully
argv[2]: cavium-ethernet.ethaddr_base=00:0c:bd:00:d9:7c
argv[3]: mtdparts=phys_mapped_flash:14m@512k(linux),-(jffs2)
ELF file is 64 bit
Attempting to allocate memory for ELF segment: addr: 0xffffffff80100000 (adjusted to: 0x0000000000100000), size 0x1387720
Allocated memory for ELF segment: addr: 0xffffffff80100000, size 0x1387720
Processing PHDR 0
Loading 133f728 bytes at ffffffff80100000
Clearing 47ff8 bytes at ffffffff8143f728
## Loading Linux kernel with entry point: 0xffffffff80104fd0 ...
Bootloader: Done loading app on coremask: 0x1
Linux version 2.6.32.27-cav-oct-im (ifmbuilds at banai) (gcc version 4.3.3 (Cavium Inc. Version: 2_3_0 build 116) ) #2 PREEMPT Fri Sep 19 16:35:56 PDT 2014
CVMSEG size: 1 cache lines (128 bytes)
Cavium Inc. SDK-2.3
bootconsole [early0] enabled
CPU revision is: 000d0601 (Cavium Octeon+)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 0000000000766000 @ 0000000000cda000 (usable after init)
memory: 000000000e800000 @ 0000000001500000 (usable)
memory: 0000000010000000 @ 0000000410000000 (usable)
Wasting 184240 bytes for tracking 3290 unused pages
Initrd not found or empty - disabling initrd
CVMX_GMXX_INF_MODE (block_id = 4) not supported on this chip
CVMX_GMXX_INF_MODE (block_id = 4) not supported on this chip
Using internal Device Tree.
Placing 64MB software IO TLB between a800000001c8c000 - a800000005c8c000
software IO TLB at phys 0x1c8c000 - 0x5c8c000
Zone PFN ranges:
DMA32    0x00000cda -> 0x000f0000
Normal   0x000f0000 -> 0x00420000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000cda -> 0x00001440
0: 0x00001500 -> 0x0000fd00
0: 0x00410000 -> 0x00420000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 67730
Kernel command line:  bootoctlinux 0x9f00000 cavium-ethernet.ethaddr_base=00:0c:bd:00:d9:7c mtdparts=phys_mapped_flash:14m@512k(linux),-(jffs2) console=ttyS1,115200
PID hash table entries: 2048 (order: 2, 16384 bytes)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
Secondary unified cache 128kB, 8-way, 128 sets, linesize 128 bytes.
Memory: 425244k/507288k available (3751k kernel code, 81644k reserved, 8380k data, 7576k init, 0k highmem)
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:453
Calibrating delay loop (skipped) preset value.. 800.00 BogoMIPS (lpj=1600000)
Mount-cache hash table entries: 256
Checking for the daddi bug... no.
devtmpfs: initialized
NET: Registered protocol family 16
Enabling Octeon big bar support
PCI Status: PCI 32-bit
PCI Clock: 66 MHz
bio: create slab at 0
pci 0000:00:06.0: PME# supported from D0 D3hot
pci 0000:00:06.0: PME# disabled
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
pci 0000:02:07.0: PME# disabled
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
pci 0000:02:09.0: PME# disabled
pci 0000:02:01.0: PCI bridge, secondary bus 0000:03
pci 0000:02:01.0:   IO window: disabled
pci 0000:02:01.0:   MEM window: disabled
pci 0000:02:01.0:   PREFETCH window: disabled
pci 0000:02:04.0: PCI bridge, secondary bus 0000:04
pci 0000:02:04.0:   IO window: disabled
pci 0000:02:04.0:   MEM window: disabled
pci 0000:02:04.0:   PREFETCH window: disabled
pci 0000:02:05.0: PCI bridge, secondary bus 0000:05
pci 0000:02:05.0:   IO window: disabled
pci 0000:02:05.0:   MEM window: 0xc0000000-0xc3ffffff
pci 0000:02:05.0:   PREFETCH window: 0x000000bf000000-0x000000bf0fffff
pci 0000:02:06.0: PCI bridge, secondary bus 0000:06
pci 0000:02:06.0:   IO window: disabled
pci 0000:02:06.0:   MEM window: 0xc4000000-0xc7ffffff
pci 0000:02:06.0:   PREFETCH window: 0x000000bf100000-0x000000bf1fffff
pci 0000:02:07.0: PCI bridge, secondary bus 0000:07
pci 0000:02:07.0:   IO window: disabled
pci 0000:02:07.0:   MEM window: 0xc8000000-0xcbffffff
pci 0000:02:07.0:   PREFETCH window: 0x000000bf200000-0x000000bf2fffff
pci 0000:02:08.0: PCI bridge, secondary bus 0000:08
pci 0000:02:08.0:   IO window: disabled
pci 0000:02:08.0:   MEM window: 0xcc000000-0xcfffffff
pci 0000:02:08.0:   PREFETCH window: 0x000000bf300000-0x000000bf3fffff
pci 0000:02:09.0: PCI bridge, secondary bus 0000:09
pci 0000:02:09.0:   IO window: disabled
pci 0000:02:09.0:   MEM window: disabled
pci 0000:02:09.0:   PREFETCH window: disabled
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0:   IO window: disabled
pci 0000:01:00.0:   MEM window: 0xc0000000-0xcfffffff
pci 0000:01:00.0:   PREFETCH window: 0x000000bf000000-0x000000bf3fffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
pci 0000:00:06.0:   IO window: 0x4000-0x4fff
pci 0000:00:06.0:   MEM window: 0xc0000000-0xd1ffffff
pci 0000:00:06.0:   PREFETCH window: 0x000000bf000000-0x000000bf3fffff
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
PCI: Enabling device 0000:02:05.0 (0000 -> 0002)
PCI: Enabling device 0000:02:06.0 (0000 -> 0002)
PCI: Enabling device 0000:02:07.0 (0000 -> 0002)
PCI: Enabling device 0000:02:08.0 (0000 -> 0002)
Switching to clocksource OCTEON_CVMCOUNT
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
/proc/octeon_perf: Octeon performance counter interface loaded
octeon_wdt: Initial granularity 5 Sec.
octeon_gpio 1070000000800.gpio-controller: probed
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 831
alg: No test for stdrng (krng)
io scheduler noop registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
mdio-octeon: probed
mdio-octeon 1180000001800.mdio: Version 1.0
i2c /dev entries driver
i2c-octeon 1180000001000.i2c: version 2.0
TCP cubic registered
NET: Registered protocol family 17
L2 lock: TLB refill 256 bytes
L2 lock: General exception 128 bytes
L2 lock: low-level interrupt 128 bytes
L2 lock: interrupt 640 bytes
L2 lock: memcpy 1152 bytes
1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 125) is a OCTEON
1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 126) is a OCTEON
console [ttyS1] enabled, bootconsole disabled
console [ttyS1] enabled, bootconsole disabled
Bootbus flash: Setting flash for 16MB flash at 0x1ec00000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
2 cmdlinepart partitions found on MTD device phys_mapped_flash
Creating 2 MTD partitions on "phys_mapped_flash":
0x000000080000-0x000000e80000 : "linux"
0x000000e80000-0x000001000000 : "jffs2"
Freeing unused kernel memory: 7576k freed
/sbin/rc starting
Updating module dependencies
Loading IPv6 module
insmod: can't read 'ipv6': No such file or directory
Mounting file systems
net.ipv4.neigh.default.gc_thresh3 = 4096
net.ipv4.neigh.default.gc_thresh2 = 2048
net.ipv4.neigh.default.gc_thresh1 = 102
net.ipv4.ip_forward = 1
net.ipv4.tcp_ecn = 1
net.ipv4.tcp_syncookies = 1
Setting up loopback
Loading kernel modules
CPLD base address 0x9000000012020000
cpld_detect (xx24) rev 1
Unsupported version information structure: rev 15
WR bus 1 phy 0 page 0 regaddr 20(dec) word16 c60
WR Reg[0x14 (20)] = 0xc60
WR bus 1 phy 0 page 0 regaddr 9(dec) word16 340
WR Reg[0x9 (9)] = 0x340
WR bus 1 phy 0 page 0 regaddr 0(dec) word16 9040
WR Reg[0x0 (0)] = 0x9040
Setting management port to 100M half-duplex
WR bus 1 phy 0 page 0 regaddr 4(dec) word16 e1
WR Reg[0x4 (4)] = 0xe1
WR bus 1 phy 0 page 0 regaddr 9(dec) word16 0
WR Reg[0x9 (9)] = 0x0
WR bus 1 phy 0 page 0 regaddr 0(dec) word16 b140
WR Reg[0x0 (0)] = 0xb140
Board: XX24
octeon-ethernet 2.0
Interface 0 has 3 ports (RGMII)
FATAL: Module octeon_mgmt not found.
mvPP: using MSI
Found 11ab:e001 (core 0) at function 0
Found 11ab:e001 (core 1) at function 0
Found 11ab:e001 (core 2) at function 0
Found 11ab:e001 (core 3) at function 0
PCI: Enabling device 0000:05:00.0 (0000 -> 0002)
eth0: Link down
eth0: 100 Mbps Half duplex, port  0, queue  0
found 11ab:e001 at 0000:05:00.0 irq 197
PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
found 11ab:e001 at 0000:06:00.0 irq 198
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
found 11ab:e001 at 0000:07:00.0 irq 199
PCI: Enabling device 0000:08:00.0 (0000 -> 0002)
found 11ab:e001 at 0000:08:00.0 irq 200
Starting daemon manager
FW v.
Starting SSHD
Could not load host key: /flash/ssh_host_key
Starting uboot_sysfs ...
Flash addr:1EC00000
Env sector:3
Starting boardkeeper ...
/sbin/rc complete
Port 0 receive error code 11, packet dropped
Found /flash/issnvram.txt
Thread init is called
Starting CPSS init
Unknown inventory data format
INIT (imLionCommonPhase1Init): porgroup 0 internalPciBase 0x60000000, busBaseAddr=0x70000000
INIT (imLionCommonPhase1Init): porgroup 1 internalPciBase 0x60010000, busBaseAddr=0x74000000
INIT (imLionCommonPhase1Init): porgroup 2 internalPciBase 0x60020000, busBaseAddr=0x78000000
INIT (imLionCommonPhase1Init): porgroup 3 internalPciBase 0x60030000, busBaseAddr=0x7c000000
INIT (imHwPhase2Init): dev 0 swdHwAllocAllDmaMem Ok.
Initializing port 0.0
Initializing port 0.1
Initializing port 0.2
Initializing port 0.3
Initializing port 0.4
Initializing port 0.5
Initializing port 0.6
Initializing port 0.7
Initializing port 0.8
Initializing port 0.9
Initializing port 0.10
Initializing port 0.11
Initializing port 0.12
Initializing port 0.13
Initializing port 0.14
Initializing port 0.15
Initializing port 0.16
Initializing port 0.17
Initializing port 0.18
Initializing port 0.19
Initializing port 0.20
Initializing port 0.21
Initializing port 0.22
Initializing port 0.23
CpssMain - done
Unable to open sizing file system.size
System Size Data Structure updated with Default Values
This switch software is implemented using Open sources from OpenSSL,OpenSSH and other open source community.
To see a full description, type "show system acknowledgement"
Ip address Configured  :  a000001
Ip Subnet Mask Configured  :  ff000000
Device Name Configured :  eth0
Interface Masters Switching Solution
warning: process `iss' used the deprecated sysctl system call with 3.5.17.2.1.
To configure, enable SNTP client
IM login: <129>Jan  1 00:00:06 ISS FM [FM - MSR] : Configuration restored successfully.
% Incorrect Login/Password
IM login: